Product Categories

Four Digits LED Display

Products Details

Custom kind kinds of size, shape,contect led display, pls let us know your detail information, then we will check price information for you, thanks!

Features for custom led digital display

* Low current operation.
* Low power consumption.
* High brightness.
* Industrial standard size.
* Easy mounting on P.C. board or sockets.
* Face color : black / gray .
* Polarity : common anode / cathode

(Ta=25℃) Absolute Maximum Ratings for reference or custom:
Power Disspation	50mW
Peak Forward Current	100mA
Reverse Voltage	5V
Operating Temperature	-20℃ ~ +85℃
Storage Temperature	-30℃ ~ +85℃
Storage Humidity	45℃ ~ +85℃
(Ta=25℃) Electrical-Optical Characteristics for reference or custom:
Parameter	Test Condition	Symbol	Min	Type	Max	Unit
Luminous Intensity	IF=20mA	IV	63.00	74.66	80.00	mcd
DC Forward Voltage	IF=20mA	VF	1.96	1.99	2.10	V
DC Reverse Current	VR=5V	IR	-	-	100	uA
Wavelength Characteristic	IF=20mA	λp	630.00	631.06	633.00	nm
Suggestion Forward Current	-	IF(Sug)	5	10	20	mA
Note: Soldering Bath: not more than 5 seconds at 260℃. The bottom ends of plastic Reflector should be at least 2mm above the solder surface. Soldering Iron: not more than 3 seconds at 300℃ under 30W. Storage & Soldering condition: 1, Store with care, Storing the units in bad condition will cause the reflector sheet and decrease it’s adhesive power, Storage the products under the condition: temperature (25℃±10℃) and humidity(25℃CRH±10℃ CRH) our recommendation. 2,The Soldering Temperature is 260℃±5℃ and Soldering Time should be less than 3 seconds, and soldering iron power should be less than 30W. 3,The soldering point should be farther than 1.6mm from body.